Comparison pumps (data sheet 10 151)

Plate version


The comparison pump model PH 60-P is a pressure generator and used for comparative measurements. It is suitable for testing and adjusting pressure measuring devices of all kinds.

 
10151 Comparison pump PH 60 P on a base plate with pressure gauge -1 to +60 bar handwheel calibration technology pneumatic version pressure generation by ARMANO

10151 Comparison pump PH 60 P with test items on a base plate with pressure gauge -1 to +60 bar handwheel calibration technology pneumatic version pressure generation by ARMANO
model PH 60-P
version pneumatic version
construction plate version
medium dry, clean, non-corrosive gas
special version for oxygen: 
wetted parts: free of grease and oil 
cylinder: blue enamelled
pmin (operating volume ≤0.1 litre) -0.5 bar (without external vacuum supply)
pmax (operating volume ≤0.1 litre) 4 bar (without external pressure supply)
recommended admission pressure -1 / +60 bar (for higher pressure ranges)
standard connection 2 connections male G ½ LH, each with 2 clamping sleeves on G ½ right or M 20x1.5 right, incl. double sealing

The model is applicable for pressure ranges from −1 to +60 bar. For testing, only gaseous, non-aggressive media shall be used. 

Gauge pressure from −0.5 bar up to +4 bar can be generated with the installed spindle pump (ambient air). An external compressed air supply and vacuum generation (vacuum pump) is required for higher pressure and vacuum ranges respectively. 

The test item is compared to a pressure measuring device with higher accuracy (e.g. Overview 2000 Test Gauges, Overview 10000 Calibration Technology). 

Comparison pumps on a base plate are small, lightweight, handy and can be mounted easily on a workbench or applied mobile on site.
 

Certificates

  • GOST-Type Certification - Russia
  • GOST Type Certification - Kazakhstan


Data sheet download